Complete Horizontal/Vertical Laser System Built for Imperial Measurement Work
The Spectra HV1305C-28E is a full-featured horizontal and vertical laser package engineered for contractors who work in feet and inches. Whether you're framing walls, setting grades, aligning columns, or leveling suspended ceilings, this kit delivers the accuracy and range you need on real jobsites. Everything ships together in a protective carrying case—no separate sourcing required.
Package Overview & Jobsite Applications
The HV1305C-28E bundles the proven Spectra HV1305C red-beam laser with the RC1402N remote control, CR700 laser receiver, GR152 15-foot inch-graduated fiberglass rod, a heavy-duty elevator tripod, and a rugged carrying case. This configuration is purpose-built for building contractors, remodelers, mechanical trades, and site supervisors who need a single, go-anywhere leveling system calibrated for imperial measurements. The laser operates effectively in both interior and exterior conditions, with the CR700 receiver extending working range beyond what the naked eye can detect.
Key Specifications
- Model: Spectra HV1305C-28E
- Laser Type: Red beam, horizontal and vertical dual-axis
- Self-Leveling Range: ±5°
- Accuracy: ±1/8 inch at 100 feet
- Operating Range (unaided): Up to 200 ft diameter
- Operating Range (with CR700 receiver): Up to 2,000 ft diameter
- Grade Capability: Manual grade in both axes
- Dust & Water Protection: IP54 rated
- Power Source: C-cell batteries
- Rod Graduation: Inch increments (GR152, 15-foot fiberglass)
- Tripod: Elevator-style, adjustable height
What's in the Kit
- HV1305C Laser: Self-leveling dual-axis red beam unit with out-of-level alarm
- RC1402N Remote Control: Wireless operation for solo-operator efficiency
- CR700 Laser Receiver: Detects beam in bright sunlight at extended range with audible and visual grade indicators
- GR152 15-Ft Inch Rod: Fiberglass construction, inch-graduated for imperial layout work
- Elevator Tripod: Center-column elevation adjustment for fast setup at varying heights
- Carrying Case: Protective molded case keeps all components organized and protected on the jobsite
Job Applications
Wall Framing & Plumb Transfer: Project a true vertical plane to align stud walls, transfer plumb points floor-to-floor, and verify squareness on partition layouts—all without a helper holding a plumb bob.
Suspended Ceiling & MEP Rough-In: Set a horizontal reference plane across an entire floor and use the CR700 receiver on the inch rod to establish consistent drop heights for grid ceilings, ductwork hangers, and pipe runs.
Site Grading & Elevation Checks: With the elevator tripod and CR700 receiver extending range up to 2,000 feet, the HV1305C-28E handles exterior grade checks, drainage slopes, and elevation verification on larger commercial sites.
Remodeling & Tenant Improvement: The compact, self-leveling design sets up fast in occupied spaces for flooring transitions, countertop leveling, door and window header alignment, and general plumb-and-level reference work.
Compatible Accessories
- CR700 Replacement Laser Receiver
- RC1402N Remote Control (Replacement)
- GR152 15-Foot Inch Fiberglass Rod
- Spectra Elevator Tripod
- Spectra HV1305C Replacement Laser Unit
- Carrying Case for HV1305C Series
Related Guides
- How to Choose the Right Laser Level Package for Your Trade
- Horizontal vs. Vertical Laser Levels: Which Do You Need?
- Using a Laser Receiver to Extend Your Working Range
- Reading Inch vs. Tenths Rods on the Jobsite
Frequently Asked Questions
- What is the difference between the HV1305C-28E and the HV1305C-28?
- The HV1305C-28E is configured with an inch-graduated fiberglass rod (GR152), making it ideal for contractors who work in feet and inches. The HV1305C-28 includes a tenths-graduated rod for engineers and surveyors who use decimal foot measurements. The laser unit and all other kit components are identical.
- Can the HV1305C-28E be used outdoors in direct sunlight?
- Yes. While the red beam may be difficult to see with the naked eye in bright sunlight, the included CR700 receiver detects the beam reliably in full sun at ranges up to 2,000 feet in diameter, making the system fully functional for exterior grading and layout work.
- Does this package include everything needed to start working immediately?
- Yes. The HV1305C-28E includes the laser, remote control, CR700 receiver, 15-foot inch rod, elevator tripod, and carrying case. You will need to supply C-cell batteries for the laser unit and AA batteries for the receiver. No additional equipment purchases are required to begin leveling and layout tasks.
- Is the HV1305C self-leveling, and what happens if it goes out of level?
- Yes, the HV1305C uses an internal self-leveling compensator that automatically levels the beam within a ±5° range. If the instrument is set up on a surface beyond that range, the out-of-level alarm activates and the laser shuts off to prevent you from working off a false reference—an important safety feature on uneven or shifting surfaces.
