The Spectra 1176 Red Target is a purpose-built aiming surface designed to work with Spectra Precision red beam pipe laser systems, delivering the sharp beam definition and color contrast that underground utility crews depend on for accurate grade control. Whether you're laying storm drain, sanitary sewer, or concrete culvert pipe, this target gives you a reliable, readable bullseye every time the laser fires down the barrel.
Overview & Jobsite Applications
Pipe laser work demands a target that holds up in wet, muddy, and confined trench environments while still giving the rod man or grade checker a clear read at distance. The Spectra 1176 is sized and finished to complement Spectra's pipe laser lineup, fitting inside standard pipe diameters and providing a centered aiming point that lets operators set grade with confidence. From residential sanitary laterals to large-diameter municipal trunk lines, this target is a low-cost, high-impact accessory that keeps your crew on grade and on schedule.
Key Specifications
- Model: Spectra 1176
- Target Color: Red — optimized for red beam pipe lasers
- Compatible Systems: Spectra Precision pipe laser lineup (red beam models)
- Application: Underground pipe grade alignment
- Construction: Durable hard-surface panel built for trench and bore conditions
- Mounting: Designed to seat inside pipe for hands-free grade reading
Key Features
- High-contrast red target surface enhances red laser dot visibility in low-light trench conditions
- Rugged construction resists jobsite abuse, moisture, and soil contact
- Lightweight and easy to transport between setups without adding bulk to your kit
- Simple placement — no complicated setup required, gets the crew moving fast
- Compatible with Spectra's established pipe laser ecosystem for consistent performance
- Affordable replacement or spare — keep a backup in the job box without breaking the budget
Job Applications
Sanitary Sewer Installation: Maintain strict invert grades on PVC and concrete sewer mains where even minor deviations create costly re-work or failed inspections. The 1176 gives the crew a defined center point to confirm the laser is reading true before each pipe is shoved home.
Storm Drain & Culvert Work: High-volume storm drain runs often cover long distances with grade tolerances that leave little room for error. Use the red target to verify laser alignment at the far end of each run before backfill begins.
Horizontal Directional Drilling & Bore Pits: When boring under roads or crossings, confirm bore track alignment using the pipe laser and this target to keep the bore on the designed grade and heading from the entry pit.
Inspection & Quality Control: Foremen and inspectors can use the target as a quick-check tool during the shift to verify that the laser setup hasn't shifted due to ground movement, equipment vibration, or accidental contact.
Compatible Accessories
- Spectra Pipe Laser Systems — red beam pipe lasers compatible with the 1176 target
- Spectra Laser Detector Accessories — expand your grade control toolkit
- Replacement Targets & Rods — keep spares on hand for multi-crew operations
- Pipe Laser Carrying Cases — protect your investment between jobs
Related Guides
- How to Set Up a Pipe Laser for Sewer Grade Work
- Choosing the Right Pipe Laser Target: Red vs. Fluorescent
- Pipe Laser Safety & Best Practices for Underground Crews
Frequently Asked Questions
- What pipe lasers is the Spectra 1176 target compatible with?
- The Spectra 1176 Red Target is designed for use with Spectra Precision red beam pipe laser models. It is optimized to work within the Spectra pipe laser ecosystem. Contact Express Tools if you need confirmation of compatibility with a specific model number.
- Why choose a red target instead of a fluorescent or white target?
- Red targets are matched to the wavelength of red beam pipe lasers, which enhances the contrast and definition of the laser dot on the target surface. In low-light trench environments, a matched-color target can make it easier to read the beam position accurately compared to a non-matched surface color.
- Can this target be used above ground?
- While the 1176 is engineered primarily for underground pipe laser applications, it can be used above grade for any task where a Spectra red beam pipe laser is deployed. However, in bright daylight conditions above ground, target visibility may be reduced compared to shaded or underground environments.
- Is the Spectra 1176 sold as a single unit or in multipacks?
- The Spectra 1176 is typically sold as a single target. For crews running multiple setups or wanting a backup, Express Tools recommends ordering a spare to keep in the job box. Contact our team for availability on quantity orders.
Frequently Asked Questions
What pipe lasers is the Spectra 1176 target compatible with?
The Spectra 1176 Red Target is designed for use with Spectra Precision red beam pipe laser models. It is optimized to work within the Spectra pipe laser ecosystem. Contact Express Tools if you need confirmation of compatibility with a specific model number.
Why choose a red target instead of a fluorescent or white target?
Red targets are matched to the wavelength of red beam pipe lasers, which enhances the contrast and definition of the laser dot on the target surface. In low-light trench environments, a matched-color target can make it easier to read the beam position accurately compared to a non-matched surface color.
Can this target be used above ground?
While the 1176 is engineered primarily for underground pipe laser applications, it can be used above grade for any task where a Spectra red beam pipe laser is deployed. However, in bright daylight conditions above ground, target visibility may be reduced compared to shaded or underground environments.
Is the Spectra 1176 sold as a single unit or in multipacks?
The Spectra 1176 is typically sold as a single target. For crews running multiple setups or wanting a backup, Express Tools recommends ordering a spare to keep in the job box. Contact our team for availability on quantity orders.
