The Spectra Precision 100981-00 Medium Carrying Case is the factory-designed storage and transport solution for your Spectra rotary laser investment. Built from rugged blow-molded polyethylene, this case is engineered to withstand the punishment of daily jobsite hauling — protecting the GL1425C, HV1305C, HV1305GC, and LL1505C series lasers through rough truck beds, crowded gang boxes, and dusty conditions. If you rely on precision equipment to get grades right the first time, protecting that equipment between uses is not optional.
Jobsite-Ready Protection Where It Counts
The 100981-00 is purpose-built for contractors who move between sites regularly. Whether you're setting grade on a commercial earthwork project, leveling foundations across a residential development, or running interior work on a tenant improvement, this case keeps your laser secure and ready to deploy. The molded interior cradles the laser body and key accessories in dedicated positions, eliminating the shifting and impact damage that generic foam cases allow over time. The exterior hard shell resists crushing, moisture, and UV degradation — all common hazards when a case rides in an open truck bed or sits on a concrete slab.
Key Specifications
- Part Number: 100981-00
- Case Size: Medium
- Construction: Blow-molded hard shell exterior
- Interior: Molded compartments for laser body and accessories
- Compatible Models: GL1425C, HV1305C, HV1305GC, LL1505C series
- Manufacturer: Spectra Precision (Trimble)
- Condition: New, OEM replacement/accessory
Key Features
- Blow-molded polyethylene shell for crush and impact resistance
- Dedicated molded interior layout — no loose foam that shifts or compresses
- Secure latch closure keeps case sealed during transport
- Sized specifically for medium Spectra rotary laser bodies and standard accessories
- OEM fit ensures laser, remote receiver, and rod clamp seat correctly
- Protects against dust, debris, and incidental moisture exposure
- Carry handle for easy single-hand transport on the job
Job Applications
Site Grading & Earthwork: Keep your GL1425C protected between grade checks on active cut-and-fill sites where equipment takes a beating from equipment traffic and dust.
Foundation Layout: Transport your HV1305C or HV1305GC safely between foundation pours without risking impact damage to the laser head or leveling mechanism.
Interior Finish Work: Protect the LL1505C during interior layout projects where the laser moves floor-to-floor and risks being bumped or dropped on hard surfaces.
Rental Fleet & Multi-Crew Operations: Standardize storage across your equipment fleet so every operator returns the laser in its correct case — reducing damage claims and downtime.
Compatible Accessories
- Spectra GL1425C Self-Leveling Rotary Laser
- Spectra HV1305C Horizontal/Vertical Rotary Laser
- Spectra LL1505C Long-Range Leveling Laser
- Spectra HR320 Laser Receiver
- Spectra Rod Clamp for Grade Rod
- Spectra Laser Replacement Batteries
Related Guides
- How to Choose the Right Rotary Laser for Your Application
- Spectra GL1425C Setup and Calibration Guide
- Rotary Laser Maintenance Tips for Contractors
- Comparing Spectra HV vs LL Series Lasers
Frequently Asked Questions
- Which laser models fit in the Spectra 100981-00 case?
- The 100981-00 is designed specifically for the Spectra Precision GL1425C, HV1305C, HV1305GC, and LL1505C series rotary lasers. The molded interior is sized to fit these models along with their standard accessories.
- Will the receiver and accessories fit inside the case with the laser?
- Yes. The 100981-00 features dedicated interior compartments for both the laser body and standard accessories including the remote receiver and rod clamp, keeping everything organized in one secure package.
- Is this case waterproof?
- The blow-molded hard shell provides strong resistance to dust and incidental moisture, but the 100981-00 is not rated as fully waterproof or submersible. It is designed for standard jobsite transport and storage conditions.
- Can I use this case for other Spectra laser models not listed?
- The 100981-00 is factory-engineered for the GL1425C, HV1305C, HV1305GC, and LL1505C series. Using it with other models may result in a poor fit that does not adequately protect the instrument. For other models, consult the compatible case listing for that specific laser.
Frequently Asked Questions
Which laser models fit in the Spectra 100981-00 case?
The 100981-00 is designed specifically for the Spectra Precision GL1425C, HV1305C, HV1305GC, and LL1505C series rotary lasers. The molded interior is sized to fit these models along with their standard accessories.
Will the receiver and accessories fit inside the case with the laser?
Yes. The 100981-00 features dedicated interior compartments for both the laser body and standard accessories including the remote receiver and rod clamp, keeping everything organized in one secure package.
Is this case waterproof?
The blow-molded hard shell provides strong resistance to dust and incidental moisture, but the 100981-00 is not rated as fully waterproof or submersible. It is designed for standard jobsite transport and storage conditions.
Can I use this case for other Spectra laser models not listed?
The 100981-00 is factory-engineered for the GL1425C, HV1305C, HV1305GC, and LL1505C series. Using it with other models may result in a poor fit that does not adequately protect the instrument. For other models, consult the compatible case listing for that specific laser.