SitePRO 11-816-C Aluminum Grade Rod - Measurement Inches

Precision INCHES Grade Rod Built for the Demands of Active Job Sites

When every inch counts on a grading or excavation project, illegible markings or a flexing rod body can cascade errors through foundation layout, utility trenching, and structural phases. The SitePRO 11-816-C is a 16-foot telescoping aluminum grade rod calibrated in INCHES, delivering sharp, precision-printed graduations and a rigid aluminum body that holds true shot after shot. Whether you're working with an optical level, laser level, or builder's transit, this rod gives instrument operators and rod men a fast, reliable read every time.

Product Overview & Jobsite Applications

The SitePRO 11-816-C is engineered for professional contractors, survey crews, and civil construction teams who need a dependable leveling rod in standard inch measurements. Its telescoping design collapses for easy transport between setups and extends to a full 16 feet to handle deep cut-and-fill work, foundation excavations, and utility corridor grading. The high-contrast INCHES graduations are printed directly on the aluminum sections — not on a removable tape — keeping markings legible and accurately registered across the rod's full working length. A locking mechanism at each section keeps the rod rigid and plumb once extended, eliminating the flex and slip that causes misreads on critical shots.

Key Specifications

• Model: SitePRO 11-816-C
• Calibration: INCHES
• Extended Length: 16 feet
• Material: Aluminum — lightweight, corrosion-resistant
• Style: Telescoping / extending sections
• Graduation Interval: Standard inch graduations for direct optical and laser rod readings
• Locking Mechanism: Section locks for rigid, slip-free extension
• Compatible Instruments: Optical levels, builder's transits, laser levels with rod sensors

Key Features

• High-Contrast INCHES Printing: Bold, precision-printed graduations applied directly to the aluminum for permanent legibility in sun, rain, and mud
• Rigid Aluminum Construction: Resists bowing and flex across all extended sections, maintaining plumb and straight reads at full reach
• 16-Foot Reach: Covers deep excavation shots, tall retaining wall layouts, and standard cut-fill grading in a single rod
• Telescoping Design: Collapses down for transport in a pickup bed or crew cab without an oversized rod case
• Positive Section Locks: Locks engage firmly at each section junction to prevent creep during a shot
• Wide Instrument Compatibility: Works with all standard optical and laser leveling instruments used in civil and building construction

Job Applications

Site Grading & Earthwork: Set and verify finish grade elevations across cut and fill zones. The 16-foot range handles most commercial site grading depths without a rod extension.

Foundation Layout & Excavation: Shoot footing and slab elevations from a benchmark. Inch-calibrated markings allow direct communication with concrete crews working in feet and inches.

Utility Trenching & Pipe Grade: Establish and check pipe invert elevations and trench bottom grades. Quick-read INCHES markings reduce instrument-to-rod communication time on long trench runs.

Roadway & Parking Lot Construction: Verify subbase, base course, and finish surface elevations against design grade during paving operations.

Compatible Accessories

• Grade Rod Carrying Case — padded protection for transport and storage
• Rod Level / Rod Bubble — keeps the rod plumb for accurate readings
• Builder's Optical Level — pairs directly with this rod for manual leveling setups
• Laser Level Rod Sensor / Detector — enables single-person grade checks with a rotating laser
• Tripod for Optical Levels — stable instrument platform for all leveling operations

Related Guides

• How to Read a Grade Rod in Inches
• Setting Up a Builder's Level with a Grade Rod
• Grade Rod vs. Leveling Rod: What's the Difference?
• Choosing the Right Rod Length for Your Project

Frequently Asked Questions

Is the SitePRO 11-816-C calibrated in decimal feet or standard inches?

This rod — model 11-816-C — is calibrated in standard INCHES. If your project calls for decimal-foot readings (engineer's format), SitePRO offers separate models with tenth-of-foot graduations. Verify your instrument and project documentation before ordering to ensure the calibration format matches your workflow.

How many sections does the rod telescope into, and how short does it collapse?

The 11-816-C is a multi-section telescoping rod designed to collapse to a compact carrying length suitable for truck transport. Exact collapsed length varies; contact Express Tools for the current specification sheet if minimum collapsed length is critical for your vehicle or storage setup.

Can this rod be used with a rotating laser level and a laser detector?

Yes. The SitePRO 11-816-C is compatible with standard laser detectors (grade rod sensors) that clamp to the rod face. Mount the detector at the appropriate height, extend the rod, and move it across the site for single-operator grade checks — a common workflow on grading and paving projects.

What is the difference between a grade rod and a leveling rod?

The terms are often used interchangeably on job sites. Technically, a leveling rod is used with an optical level or transit for differential leveling, while a grade rod is frequently used to set and check earthwork grades in the field. The SitePRO 11-816-C functions effectively in both roles, making it a versatile addition to any surveying or grading equipment kit.