Free Shipping on orders over $500
Spectra Precision HV1305C-28E Horiz/Vert - Interior/Exterior RED Beam Laser Package with CR700 Multi-Use Receiver, Remote, INCHES Rod, Elevator Tripod and Small Case
±5° Range
Cover large layout jobs with a ±5° working reach.
±1/8 inch at 100 feet Accuracy
Hold grade with a ±1/8 inch at 100 feet accuracy rating.
Power
Runs on C-cell batteries for jobsite flexibility.
Authorized Spectra Precision Dealer
Genuine, factory-fresh Spectra Precision equipment with legitimate firmware and calibration documentation.
Eliminates the grade checker
Grade checkers cost $600-800/day. A rotary laser setup pays for itself in weeks and works indefinitely.
Authorized Dealer
Genuine equipment sourced straight from manufacturer partners.
Ships Same Day
Orders placed before 2 PM CT leave the dock today.
Genuine Gear
Factory-fresh, authentic units with legitimate firmware.
Best-Price Guarantee
Authorized-dealer pricing on every unit — request a quote anytime.
Kit Builder
Not sure what goes with this rotary laser?
Answer a few job questions and our Kit Builder assembles the full setup — receiver, rod, tripod, and case matched to your workflow.
Quick Answer
What is the Spectra Precision HV1305C-28E?
The Spectra Precision HV1305C-28E Horiz/Vert - Interior/Exterior RED Beam Laser Package with CR700 Multi-Use Receiver, Remote, INCHES Rod, Elevator Tripod and Small Case is a Spectra Precision Rotary Laser with ±5° self-leveling range and ±1/8 inch at 100 feet accuracy. It's available from Express Tools as an authorized Spectra Precision dealer with same-day shipping on in-stock orders.
What contractors use this rotary lasers for
Grade Checking and Slope Verification
Grading contractors attach the bracket to measuring rods to establish consistent elevation references across jobsites, enabling accurate slope verification and grade confirmation. The stable mounting ensures repeatable readings when checking drainage pitch, embankment elevation, or rough-grade preparation over long sight lines.
Foundation and Elevation Layout
Foundation crews and general contractors use the bracket to position laser receivers at precise heights during foundation layout, establishing elevation datums and reference points for structural work. The secure, level attachment eliminates receiver drift that could cause layout errors on multi-story or complex foundation projects.
Concrete Slab Preparation and Finishing
Concrete contractors rely on the bracket for slab preparation and finishing work, using it to maintain elevation reference points and check flatness across concrete surfaces. The durable brass and aluminum construction withstands the wet concrete environment without compromising receiver stability.
Drainage and Site Drainage Design Layout
Drainage and site work specialists use the bracket to verify proper drainage pitch and establish grade lines for storm water systems, swales, and drainage structures. Accurate positioning on measuring rods allows crews to confirm slopes meet design specifications across large site areas.
Building Layout and Line Establishment
General contractors and survey-focused crews use the bracket during initial site layout to establish building lines, reference points, and elevation control for structural placement. The consistent alignment ensures accurate positioning of structural elements and compliance with project grade and layout specifications.
Product Description
Complete Horizontal/Vertical Laser System Built for Imperial Measurement Work
The Spectra HV1305C-28E is a full-featured horizontal and vertical laser package engineered for contractors who work in feet and inches. Whether you're framing walls, setting grades, aligning columns, or leveling suspended ceilings, this kit delivers the accuracy and range you need on real jobsites. Everything ships together in a protective carrying case—no separate sourcing required.
Package Overview & Jobsite Applications
The HV1305C-28E bundles the proven Spectra HV1305C red-beam laser with the RC1402N remote control, CR700 laser receiver, GR152 15-foot inch-graduated fiberglass rod, a heavy-duty elevator tripod, and a rugged carrying case. This configuration is purpose-built for building contractors, remodelers, mechanical trades, and site supervisors who need a single, go-anywhere leveling system calibrated for imperial measurements. The laser operates effectively in both interior and exterior conditions, with the CR700 receiver extending working range beyond what the naked eye can detect.
Key Specifications
- Model: Spectra HV1305C-28E
- Laser Type: Red beam, horizontal and vertical dual-axis
- Self-Leveling Range: ±5°
- Accuracy: ±1/8 inch at 100 feet
- Operating Range (unaided): Up to 200 ft diameter
- Operating Range (with CR700 receiver): Up to 2,000 ft diameter
- Grade Capability: Manual grade in both axes
- Dust & Water Protection: IP54 rated
- Power Source: C-cell batteries
- Rod Graduation: Inch increments (GR152, 15-foot fiberglass)
- Tripod: Elevator-style, adjustable height
What's in the Kit
- HV1305C Laser: Self-leveling dual-axis red beam unit with out-of-level alarm
- RC1402N Remote Control: Wireless operation for solo-operator efficiency
- CR700 Laser Receiver: Detects beam in bright sunlight at extended range with audible and visual grade indicators
- GR152 15-Ft Inch Rod: Fiberglass construction, inch-graduated for imperial layout work
- Elevator Tripod: Center-column elevation adjustment for fast setup at varying heights
- Carrying Case: Protective molded case keeps all components organized and protected on the jobsite
Job Applications
Wall Framing & Plumb Transfer: Project a true vertical plane to align stud walls, transfer plumb points floor-to-floor, and verify squareness on partition layouts—all without a helper holding a plumb bob.
Suspended Ceiling & MEP Rough-In: Set a horizontal reference plane across an entire floor and use the CR700 receiver on the inch rod to establish consistent drop heights for grid ceilings, ductwork hangers, and pipe runs.
Site Grading & Elevation Checks: With the elevator tripod and CR700 receiver extending range up to 2,000 feet, the HV1305C-28E handles exterior grade checks, drainage slopes, and elevation verification on larger commercial sites.
Remodeling & Tenant Improvement: The compact, self-leveling design sets up fast in occupied spaces for flooring transitions, countertop leveling, door and window header alignment, and general plumb-and-level reference work.
Compatible Accessories
- CR700 Replacement Laser Receiver
- RC1402N Remote Control (Replacement)
- GR152 15-Foot Inch Fiberglass Rod
- Spectra Elevator Tripod
- Spectra HV1305C Replacement Laser Unit
- Carrying Case for HV1305C Series
Related Guides
- How to Choose the Right Laser Level Package for Your Trade
- Horizontal vs. Vertical Laser Levels: Which Do You Need?
- Using a Laser Receiver to Extend Your Working Range
- Reading Inch vs. Tenths Rods on the Jobsite
Frequently Asked Questions
- What is the difference between the HV1305C-28E and the HV1305C-28?
- The HV1305C-28E is configured with an inch-graduated fiberglass rod (GR152), making it ideal for contractors who work in feet and inches. The HV1305C-28 includes a tenths-graduated rod for engineers and surveyors who use decimal foot measurements. The laser unit and all other kit components are identical.
- Can the HV1305C-28E be used outdoors in direct sunlight?
- Yes. While the red beam may be difficult to see with the naked eye in bright sunlight, the included CR700 receiver detects the beam reliably in full sun at ranges up to 2,000 feet in diameter, making the system fully functional for exterior grading and layout work.
- Does this package include everything needed to start working immediately?
- Yes. The HV1305C-28E includes the laser, remote control, CR700 receiver, 15-foot inch rod, elevator tripod, and carrying case. You will need to supply C-cell batteries for the laser unit and AA batteries for the receiver. No additional equipment purchases are required to begin leveling and layout tasks.
- Is the HV1305C self-leveling, and what happens if it goes out of level?
- Yes, the HV1305C uses an internal self-leveling compensator that automatically levels the beam within a ±5° range. If the instrument is set up on a surface beyond that range, the out-of-level alarm activates and the laser shuts off to prevent you from working off a false reference—an important safety feature on uneven or shifting surfaces.
Why This Equipment
Auto Self-Leveling
Compensates for job site movement and setups — no manual leveling required.
Long Range
Reach 2,600+ ft with a receiver — covers large pads and site-wide grading without moving.
IP55+ Protection
Dust-tight and water jet resistant — built for outdoor construction in any weather.
Radio Remote
Change grade or elevation from the cab or anywhere on site without walking back.
What's In The Box
- Spectra Precision 5079-070 DE Rod Bracket
The right rotary laser pays for itself in weeks.
A grade checker costs $600–800 per day. A quality rotary laser setup eliminates that cost indefinitely — and works faster. One operator with a good laser and receiver can cover ground that used to take a two-person crew.
The gap between a budget unit and a professional-grade one shows up in the field: self-leveling range on uneven pads, IP55+ protection through rain and dust, and radio remote control so you're not walking back to the instrument every time the job moves.
Express Tools is an authorized dealer with genuine, factory-fresh inventory and same-day shipping on in-stock units. We know this equipment and can answer spec questions before you order.
Specifications
Technical Specs
Manufacturer data and field-verified measurements.
| Knowledge Summary | The Spectra Precision 5079-070 DE Rod Bracket is an essential accessory for professionals using Spectra HL Series Laserometers on job sites. This high-quality rod bracket is engineered to securely attach laser receivers to measuring rods, ensuring accurate positioning and stable readings during leveling and alignment tasks. Compatible with both ash/aluminum and aluminum Laser DE Rods, constructed from anodized aluminum and brass for superior durability, this professional-grade design withstands demanding construction environments. Perfect for contractors, surveyors, and construction professionals depending on precision leveling equipment, the bracket maintains consistent alignment with laser receivers. |
|---|---|
| Compatibility | Spectra HL Series Laserometers |
| Rod Types | Ash/aluminum and aluminum Laser DE Rods |
| Material | Anodized aluminum and brass |
| SKU | Spectra Precision 5079-070 |
| Construction | All-metal |
| Key Feature 1 | Secures laser receivers to measuring rods |
| Key Feature 2 | Compatible with ash/aluminum and aluminum rods |
| Key Feature 3 | Anodized aluminum and brass construction |
| Key Feature 4 | Professional-grade design |
| Key Feature 5 | All-metal durability |
| Use Cases | Leveling and alignment tasks; Construction site measurements; Grade checking operations; Elevation reference work; Building layout and positioning |
| Setup Steps | Slide bracket onto measuring rod | Position bracket at desired height | Attach laser receiver to bracket mounting point | Ensure receiver is level | Secure all connections before laser operation |
| Pro Tips | Use on aluminum rods for best compatibility | Check bracket tightness before each measurement session | Clean brass components regularly to prevent corrosion | Store in dry conditions when not in use |
| Compatible Equipment | Spectra HL Series Laserometers; Laser DE Rods (ash/aluminum and aluminum); Laser receivers; Measuring rods |
| Common Issues | Bracket sliding on rod during use | Receiver not sitting level in bracket | Corrosion on brass components |
| Self-leveling Range | ±5° |
| Accuracy | ±1/8 inch at 100 feet |
| IP Rating | IP54 rated |
| Power | C-cell batteries |
| Remote Control | Wireless operation for solo-operator efficiency |
Built for Spectra Precision equipment owners
Log every grade shot from this laser
Gradelog turns your rotary laser workflow into documented, defensible field records — grade shots, photos, and as-builts tied to each job.
- Grade shot logging with cut/fill
- Calibration reminders for this instrument
- AI field assistant for setup questions
Customers Also Bought
Related Products
More in Rotary Lasers
View all
BOSCH GRL900-20HVK REVOLVE900 Self-Leveling Horizontal / Vertical Rotary Laser Package
$629.95
View Product
Spectra Precision LL300S-8 Laser level Package with HR320 Receiver
$1195.00
View Product
Leica Rugby 620 Red Beam Rotary Laser Package - Large Case (6019425) with Rod Eye 120 Receiver - Alkaline / Complete Kit with Rod/Inches, HD Tripod
$1766.00
View Product
Spectra Precision LL300S-47-NR Laser Package w/HL760 Receiver and Rechargeable Batteries
$1195.00
View ProductCommon Issues & Error Codes
Frequently Asked Questions
Customer Reviews
No reviews yet — be the first.
Loading reviews…
Spectra Precision HV1305C-28E Horiz/Vert - Interior/Exterior RED Beam Laser Package with CR700 Multi-Use Receiver, Remote, INCHES Rod, Elevator Tripod and Small Case
$2230.00
Free 30 days with every Express Tools purchase
Your equipment. Your data. All in one place.
Gradelog is the field-execution platform built for grading and earthwork crews. Log grade shots, track cut/fill, document phases with photos, and generate as-built reports — from the cab to the office.
- Grade shots & cut/fill tracking per job
- Photo documentation by phase, task, and equipment
- As-built reports ready for inspector sign-off
- AI field assistant — troubleshoot on the jobsite
Built by the same team as Express Tools
Try Free →30 days
Free trial
8 languages
Supported
iPhone + Android
Works on